Japchester Stock

[Steveu]

All,

Looking to get rid of the current buttstock on the Japchester Low Wall. I tried CPA and Treebone , but no avail. The rifle sports a Badger Barrel and shoots great. The Japchester High Wall wood will not work because it is a straight cut receiver and the low wall receiver is dished.

Any suggestions?

Cheers,
Steve

[Don McDowell]

Might try Pecatona stocks

[Steveu]

Pecatona only has high wall stocks.

[beltfed]

YOu might contact Dave Crossno gun stocks and discuss the problem.
I believe they have a pattern for the Japchester/ browning BPCR Hi walls, but they might be able to use your current
low wall stock front end as a pattern to modify off of their Hi wall pattern.
dibbleguns.com
I have a similar situation with a Brg Low wall traditional Hunter action with a 38-72 Krieger barrel on it.
My friend who had bought it from me lost the low wall stock somehow.
I, too want a BPCR Hi Wall pattern pistol grip stock on it. I have actually bolted a Brg Bpcr stock on to the action.
It fits, but the cutout for the tang is longer than the low wall tang, so as soon as I make a deal to buy the barrelled action
back from him, I may pick up a Crossno stock for it, telling them to do the rough inletting on the top tang short of their pattern.
Arnie

[Kurt]

You might ask Dan Zimmerman at DZ Arms if he can make you a stock. He has the equipment for duplicating a stock.
When I picked up my Hep he was working with a MVA receiver on one.

[Steveu]

Thanks fella’s for the info. I will give both a call this week.

[beltfed]

Here is the Crossno website

https://www.angelfire.com/ok5/crossnosto...ttern.html

Arnie

[Gussy]

This is my Browning low wall. It sounds like what you're looking for. Have you checked for a Browning?

[beltfed]

Gussy,
Yes, that is exactly the stock I would like to have on this 38-72 Low Wall Brg.
should I be able to buy the barrelled action back from my friend.
Shotgun butt, PG. Don't need a right hand cheekpiece on mine, though. I shoot left handed. The Brg BPCR pattern at Crossno's has right hander cheekpiece.
Arnie

[Kurt]

Arnie,

Will a low wall handle the heavy load of the .38-72?