+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: Reloading (http://historicshooting.com/forum-4.html)
+---- Forum: Blackpowder cartridge (http://historicshooting.com/forum-18.html)
+---- Thread: 45-70 and 2 FG KIK (/thread-1368.html)
45-70 and 2 FG KIK - Eric Johanen - 04-28-2015
Out yesterday at 200 benched with the Rough Rider 45-70. Load used: Winchester neck sized brass, Federal large pistol primer, notecard under primer wad punched when seating primer. Sagebrush/ PJ 535 grain money bullet (I bought a bunch of these to save time casting for practice use) They shoot well but not as good as my cast bullets. 70.0 grains of KIK 2 FG and a .060 vegi wad. Bullets seated with 2 grooves exposed and I need just a slight bit of thumb pressure to fully seat. Cleaned between shots with 1 damp and 1 dry patch. 3 shots to center up and 8 nice 10's and 1 6 O'clock X. Had a clean target going and managed to put my last shot in the 9 ring at 5 O'clock! Last 7 shots came up as 4 10's, 2 X's and again last shot a 9 at 12 O'clock! Some days you can not get a break!! One thing I have noticed is using the MVA apertures is the annulus rings are pretty thin for my ageing eye's. I find it much easier to use the thicker annulus rings on the Distant Thunder apertures mounted on my 45-90. I have to dig around the parts bins and see if I have some on hand that are wider for the MVA front globe sight. Light and wind changes and a good day for practice.
RE: 45-70 and 2 FG KIK - bruce moulds - 04-29-2015
eric,
distant thunder can make you inserts for mva sights,
they can make whatever aperture size and annulus thickness you need.
it pays to buy a set.
tor the targets I shoot on I have a set from 3.0 to 4.0 mm in 0.2 mm increments.
they are a good company to deal with.
keep safe,
bruce.
RE: 45-70 and 2 FG KIK - Eric Johanen - 04-29-2015
I rooted around through my high power stuff yesterday and don't have any suitable apertures for the MVA front sight. I'll get to measuring up the DT currently on my 45-90 and send off an order to them for a set of apertures. Larger annulus and larger apertures. Old eyes are having problems with those fine MVA inserts. Working up brass for the 45-90 and will patch some bullets today as the weather is poor for shooting today.
RE: 45-70 and 2 FG KIK - Don McDowell - 04-29-2015
The Ron Snover lollipop's are a pretty good set up for the "sharps" style sights also.