+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: Reloading (http://historicshooting.com/forum-4.html)
+---- Forum: Smokeless and bp subs (http://historicshooting.com/forum-20.html)
+---- Thread: Shiloh 40-65 (/thread-3032.html)
Shiloh 40-65 - Stephen Borud - 07-26-2020
A friend of mine is bound and determined to shoot a grease groove bullet and smokeless powder in his Shiloh 40-65. We worked up a very nice load with black powder and PP bullets but he’s just not wanting to mess with all of that sooo what do you guys that shoot this calibre recommend for a bullet and powder/powder charge etc? I’m clueless when it comes to smokeless and GG bullets in a Sharps.
Thanks
SB
RE: Shiloh 40-65 - Don McDowell - 07-26-2020
Stephen, might take a look at the online data for 5744 or Blackhorn 209.
RE: Shiloh 40-65 - Stephen Borud - 07-26-2020
Thanks Don
RE: Shiloh 40-65 - Don McDowell - 07-26-2020
Try bet Stephen. Hope all is well in Borudville.
RE: Shiloh 40-65 - Hiwall55 - 07-27-2020
Saeco 740 with 21 grains of 5744 is what my friends 40/65 likes, its a pedersoli.
RE: Shiloh 40-65 - beltfed - 07-27-2020
I suggest you try out Reloader 7. It works great and very accurate in my 38-55 and my 45-70 hunting rifles.
It shoots clean, and it is fine grained and meters well.
That and IMR 4759 are what I would try if I was to "dirty" my 40-65 with that new fangled type powder.
beltfed/arnie
RE: Shiloh 40-65 - Stephen Borud - 07-27-2020
Thanks guys. I’ll write all this down and pass the info to him.
SB
RE: Shiloh 40-65 - Stephen Borud - 07-27-2020
Thanks Don, we are doing alright. Not many rigs running so business is slow. It will pick up eventually, I just got to survive it.
SB