Barrel switch

[Kurt]

Sam.

One thing I have noticed on mine is the firing pin does make a deep impact on the primer and it has stuck in the detent and shows sign of dragging out of the dent and I can feel it when I drop the lever sometimes. I have since put the hammer on halve cock like I do the Sharps and this problem has stopped.
Using Fed pistol primers the dent is really deep almost like my Trapdoors will dent the harder CCI rifle primers. I quit using the pistol primers in the CPA. Cant really see any difference in accuracy using them over rifle primers in this rifle.
I'm going to give them a call about the pin problem. I need a pin that holds the extractor on the lever anyway for a slave pin making the block change easier.

Gary I don't know what the thread is bit it is a very good fit.

Kurt