Gavin Dinghams 44 mould

[Nuclearcricket]

Caprock, I can't vouch for what mold block material was used for the bullets shown at the beginning of this thread. But I can vouch for the quality of the molds made by Accurate Molds. I have the 44-480LS mold and it is cut into aluminum blocks. They are of good quality and cast very well.
One thing I do not like about aluminum blocks is that if you get something stuck on the underside of the spru plate it will scar the top of the mold. This is with anyone's aluminum mold. My only complaint about the Accurate mold is that the guide pins fit a bit tight and I had to give the handle an extra squeeze to make sure that they were closed tightly, and I think that is a minor concern. The bullets come out round and to size, what more do you really need? I would recommend the Accurate Molds and would not hesitate to purchase from him again. The really nice thing is that you can have any of his listed molds changed to what you want. I did that with the mold that I got. And if your concerned about turn around time for a custom cut mold, consider that I placed my order on a Wednesday and had the mold Monday and it had to come cross country as I am in PA. Just can't beat that at all in my book.
Sam