Hello All,

[Mike]

Doug, It really shouldn't make any difference but I buy my alloys already mixed, from either BACO or John Walters in Oklahoma. One reason for that is because I cast bullets from a 10 pound pot, a Lyman Big Dipper, and that's not big enough for making real good mixes. And with the small pot, you're making a mix every time you cast. And for casting flux I've never gotten anything special, just use candle wax, beeswax, or some bullet lube. A little bit of that DGL you're getting will do well. Yes, fluxing can be more important for you if you mix your own alloys. Shoot sharp, Mike