Best brass for Shiloh

[MikeT]

But is it supposed to be dimpling the cases all the way around about an inch down? Seems to be collapsing the walls. Each dimple a 1/4" line. Gotta walk the dogs.

Sounds like too much lube left on the case when you put it into the die. Minimum grease film is a must to prevent creases/grooves/dimples etc...

You my need to re-lube the case several times to size it down fully. Sometimes I just wipe the partially sized case with my fingers [some lube sticks to your fingers] and reinsert the case to size it a little farther down, then repeat.

Keep on hav'n fun!
MikeT