Historic Shooting Forums › General › Reloading › Bullets and moulds v
40-400-SP-CSA

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
40-400-SP-CSA
01-28-2016, 08:18 PM,
#27
Mike Offline
Posting Freak
*****
 		Posts: 1,014
Location: Wet Washington
Joined: Oct 2012
Reputation: 2
RE: 40-400-SP-CSA
And, to follow up on the comparison of Hornady and Jamison brass, the Hornady, a .405 case shortened to 2.5", has a slightly greater capacity than the new .40/70 SS by Jamison. This was hastily "tested" simply by putting a measured amount of powder in each case and making a visual check. With no drop tube, the Jamison case was "heaping" with 68 grains of OE 1 1/2F while the Hornady case had just a bit of "free bore" left, making it easier to position a wad. Both of these cases were fired yesterday and left un-sized for the comparison. Really, there isn't much difference. Shoot sharp, Mike
Find
Reply


Messages In This Thread
40-400-SP-CSA - by Mike - 01-15-2016, 11:48 AM
RE: 40-400-SP-CSA - by Don McDowell - 01-15-2016, 01:32 PM
RE: 40-400-SP-CSA - by Mike - 01-15-2016, 03:05 PM
RE: 40-400-SP-CSA - by Hiwall55 - 01-15-2016, 04:10 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-15-2016, 08:13 PM
RE: 40-400-SP-CSA - by Mike - 01-16-2016, 11:04 AM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 12:41 AM
RE: 40-400-SP-CSA - by Don McDowell - 01-21-2016, 12:51 AM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 10:46 AM
RE: 40-400-SP-CSA - by Don McDowell - 01-21-2016, 10:52 AM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 11:49 AM
RE: 40-400-SP-CSA - by Don McDowell - 01-21-2016, 11:51 AM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 12:28 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-21-2016, 12:31 PM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 01:22 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-21-2016, 02:18 PM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 02:34 PM
RE: 40-400-SP-CSA - by Mike - 01-21-2016, 03:29 PM
RE: 40-400-SP-CSA - by bruce moulds - 01-22-2016, 06:51 AM
RE: 40-400-SP-CSA - by Mike - 01-22-2016, 08:21 PM
RE: 40-400-SP-CSA - by Mike - 01-28-2016, 12:19 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-28-2016, 03:34 PM
RE: 40-400-SP-CSA - by Mike - 01-28-2016, 04:26 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-28-2016, 06:10 PM
RE: 40-400-SP-CSA - by Mike - 01-28-2016, 06:46 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-28-2016, 07:00 PM
RE: 40-400-SP-CSA - by Mike - 01-28-2016, 08:18 PM
RE: 40-400-SP-CSA - by Don McDowell - 01-28-2016, 08:26 PM
RE: 40-400-SP-CSA - by Mike - 01-28-2016, 08:58 PM
RE: 40-400-SP-CSA - by Mike - 02-14-2016, 11:13 PM
RE: 40-400-SP-CSA - by Don McDowell - 02-15-2016, 12:15 AM
RE: 40-400-SP-CSA - by Mike - 02-15-2016, 12:27 AM
RE: 40-400-SP-CSA - by Don McDowell - 02-15-2016, 01:28 AM
RE: 40-400-SP-CSA - by Mike - 02-15-2016, 11:02 AM
RE: 40-400-SP-CSA - by Don McDowell - 02-15-2016, 01:57 PM
RE: 40-400-SP-CSA - by Hiwall55 - 02-15-2016, 04:07 PM
RE: 40-400-SP-CSA - by Mike - 02-15-2016, 07:40 PM
RE: 40-400-SP-CSA - by Don McDowell - 02-15-2016, 08:17 PM
RE: 40-400-SP-CSA - by Mike - 02-15-2016, 09:49 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication