Full length scope

[Ironramrod]

Trapper, the 9/64 diameter hole should be easy enough to put in your sight aperture, but you will need to do this job on a drill press; but you already knew that I bet. Use a good quality drill bit and drill a few practice holes threw similar metal before doing the aperture. A little cutting oil on the aperture wouldn't hurt anything either. A Hadley eye disc is really useful in target work to adjust light in the aperture to the shooting conditions. Not so good for hunting, because it gives you 1 more thing you may need to adjust before shooting, and especially if Moby Buck is already thinking of exiting and going to the next zip code. Barrel sights are hard to beat for hunting.

Regards
IR