compression/velocity

[Trapper]

I am at work so this is as close as I can get with out looking at my notes. 45-2 7/8 loaded with a CCI br2 primer, 110 grains goex FFG drop tubed down a 30" tube, .030 poly wad then compress powder .400, 1/8" felt wad lubed with spg, card wad, 560 grain paper patch bullet finger seated .300 in the case and slight taper crimp to hold bullet. This is my hunting load. I am still trying to figure this all out. This load shoots well and I can shoot 20 or so rounds with no fouling control and still have good accuracy for hunting. And I smear jojoba oil on the patch after loading and let dry.
Trapper