Having some fun with a pair of Uberti 1860s

[Kurt]

Hanz if I would have shot past the camera like that I would have wiped it out I seen some wads fly past.
The front sight is not hard to get centered up. I have a couple 6 shooters that were off far enough that I had to fix them. Those front blades are soldered into a slot and I just put a hot soldering iron on one and melted the solder and just moved the blasé slightly and let it cool. The other one was silver soldered and I had to use a sharp flame torch on the blade to get it to break loose. I cant tell I heated the blade to get it fixed.