Designing the 2-diameter paper patch bullet.

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Thread Modes

Designing the 2-diameter paper patch bullet.

08-29-2018, 09:40 PM,

#17

Don McDowell Offline

Administrator

Posts: 6,735
Location: Ft. Laramie Wy
Joined: May 2012
Reputation: 2

RE: Designing the 2-diameter paper patch bullet.

Well here it is. As wrapped and loaded in Jamison 40-70 brass. Length is 1.35, measurement on the base is .400 as cast and the base of the nose at the transition is .396. Weighs in at 418 gr wrapped.

A wise man can always be found alone. A weak man can always be found in a crowd.

Find

« Next Oldest | Next Newest »

Messages In This Thread

Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-05-2018, 09:44 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-05-2018, 10:24 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 08-06-2018, 08:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-06-2018, 10:27 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 08-06-2018, 10:09 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-06-2018, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-07-2018, 09:13 PM

RE: Designing the 2-diameter paper patch bullet. - by AzTBH - 08-18-2018, 05:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-18-2018, 08:38 PM

RE: Designing the 2-diameter paper patch bullet. - by AzTBH - 08-20-2018, 08:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-23-2018, 08:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 05:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 06:26 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 08:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 08:35 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 09:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 09:40 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 11:37 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 01:47 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 02:27 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 03:28 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 04:51 PM

RE: Designing the 2-diameter paper patch bullet. - by Martini2 - 08-30-2018, 07:44 PM

RE: Designing the 2-diameter paper patch bullet. - by Eric Johanen - 09-02-2018, 10:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-04-2018, 09:34 AM

RE: Designing the 2-diameter paper patch bullet. - by Eric Johanen - 09-04-2018, 10:07 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-04-2018, 10:47 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 09-06-2018, 12:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 01:10 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 09-06-2018, 05:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 09-06-2018, 01:20 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 03:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 06:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 09-06-2018, 10:47 PM

RE: Designing the 2-diameter paper patch bullet. - by flatsguide - 09-18-2018, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-05-2018, 07:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-05-2018, 07:24 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-05-2018, 10:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-05-2018, 10:05 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 06:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-06-2018, 07:24 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 07:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 07:57 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 08:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 08:24 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-06-2018, 09:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 11:40 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 12:39 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-07-2018, 01:01 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:54 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 09:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 06:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 06:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:08 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 08:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 08:25 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 10:28 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-09-2018, 10:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 01:49 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 07:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 07:57 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 07:22 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 09:49 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 10:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-09-2018, 11:47 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-10-2018, 12:12 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-10-2018, 12:14 AM

RE: Designing the 2-diameter paper patch bullet. - by MikeT - 11-10-2018, 12:29 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-10-2018, 04:48 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-10-2018, 10:06 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-11-2018, 09:49 AM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-11-2018, 09:54 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-11-2018, 11:34 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-11-2018, 11:39 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-11-2018, 11:14 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-12-2018, 12:12 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-02-2019, 08:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-02-2019, 10:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-02-2019, 11:02 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 09:17 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 09:27 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 10:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-03-2019, 10:04 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-03-2019, 10:06 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 10:10 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 01-03-2019, 11:15 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-03-2019, 11:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-03-2019, 11:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 12:23 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 12:44 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 01:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 01:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 01:20 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 04:11 PM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 01-04-2019, 04:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 05:38 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 06:03 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 08:53 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 09:58 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 12:02 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 12:17 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 01:20 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 02:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 03:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 04:31 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 04:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 06:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-05-2019, 08:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 09:02 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 09:42 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-05-2019, 10:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-07-2019, 12:26 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-07-2019, 07:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-08-2019, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-11-2019, 11:12 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-11-2019, 11:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-12-2019, 01:08 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-12-2019, 12:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-12-2019, 01:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-12-2019, 09:58 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-27-2019, 01:35 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 12:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-28-2019, 06:44 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 07:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 07:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-28-2019, 07:33 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 09:26 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 09:34 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 10:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 10:17 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 01:31 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-29-2019, 10:57 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 12:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-29-2019, 06:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 08:12 PM

Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 08:33 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-05-2019, 09:38 AM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 05-05-2019, 07:09 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-05-2019, 11:05 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-05-2019, 11:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:27 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 05-06-2019, 09:48 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:57 AM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 05-06-2019, 10:25 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:31 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 10:36 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 12:14 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 01:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-06-2019, 02:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 02:48 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 03:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 05:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 07:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 08:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:31 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 08:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 09:01 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:55 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 11:15 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-07-2019, 08:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-07-2019, 09:26 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-07-2019, 10:09 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-07-2019, 05:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-07-2019, 07:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-07-2019, 11:36 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-08-2019, 11:03 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-08-2019, 06:49 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-08-2019, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-08-2019, 08:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-09-2019, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-09-2019, 10:47 AM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 06-18-2019, 01:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Nuclearcricket - 06-18-2019, 04:05 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 06-18-2019, 05:14 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 06-18-2019, 06:01 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-10-2020, 11:34 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-10-2020, 06:52 PM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-21-2021, 03:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 04-21-2021, 05:16 PM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-21-2021, 10:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 04-21-2021, 10:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 04-24-2021, 08:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-25-2021, 11:17 AM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-25-2021, 11:45 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-25-2021, 12:35 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 04-26-2021, 10:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-26-2021, 11:53 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 04-27-2021, 12:55 AM

RE: Designing the 2-diameter paper patch bullet. - by Steveu - 01-16-2024, 12:10 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-19-2024, 08:47 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-13-2024, 02:00 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-14-2024, 10:19 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-14-2024, 02:08 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 03-14-2024, 08:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-14-2024, 09:21 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-17-2024, 02:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-18-2024, 03:22 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-20-2024, 03:28 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-20-2024, 03:32 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-21-2024, 08:13 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-21-2024, 10:12 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-22-2024, 09:28 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-22-2024, 11:03 AM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-22-2024, 02:54 PM

View a Printable Version

Users browsing this thread: 5 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me