Designing the 2-diameter paper patch bullet.

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Thread Modes

Designing the 2-diameter paper patch bullet.

11-07-2018, 08:54 AM,

#51

Distant Thunder Offline

Posting Freak

Posts: 921
Location: NE Wiscinsin
Joined: May 2017
Reputation: 0

RE: Designing the 2-diameter paper patch bullet.

That was his .40-72 I'm pretty sure. If it was pp, that is a very long bullet and very pointed. It shoot very well out to 800, not so well beyond that. Too long is not good, too long and too pointed makes even worse.

Jim Kluskens
aka Distant Thunder

Find

« Next Oldest | Next Newest »

Messages In This Thread

Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-05-2018, 09:44 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-05-2018, 10:24 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 08-06-2018, 08:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-06-2018, 10:27 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 08-06-2018, 10:09 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-06-2018, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-07-2018, 09:13 PM

RE: Designing the 2-diameter paper patch bullet. - by AzTBH - 08-18-2018, 05:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-18-2018, 08:38 PM

RE: Designing the 2-diameter paper patch bullet. - by AzTBH - 08-20-2018, 08:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-23-2018, 08:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 05:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 06:26 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 08:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 08:35 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 09:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 09:40 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 11:37 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 01:47 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 02:27 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 03:28 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 04:51 PM

RE: Designing the 2-diameter paper patch bullet. - by Martini2 - 08-30-2018, 07:44 PM

RE: Designing the 2-diameter paper patch bullet. - by Eric Johanen - 09-02-2018, 10:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-04-2018, 09:34 AM

RE: Designing the 2-diameter paper patch bullet. - by Eric Johanen - 09-04-2018, 10:07 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-04-2018, 10:47 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 09-06-2018, 12:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 01:10 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 09-06-2018, 05:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 09-06-2018, 01:20 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 03:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 06:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 09-06-2018, 10:47 PM

RE: Designing the 2-diameter paper patch bullet. - by flatsguide - 09-18-2018, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-05-2018, 07:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-05-2018, 07:24 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-05-2018, 10:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-05-2018, 10:05 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 06:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-06-2018, 07:24 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 07:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 07:57 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 08:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 08:24 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-06-2018, 09:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 11:40 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 12:39 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-07-2018, 01:01 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:54 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 09:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 06:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 06:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:08 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 08:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 08:25 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 10:28 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-09-2018, 10:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 01:49 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 07:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 07:57 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 07:22 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 09:49 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 10:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-09-2018, 11:47 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-10-2018, 12:12 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-10-2018, 12:14 AM

RE: Designing the 2-diameter paper patch bullet. - by MikeT - 11-10-2018, 12:29 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-10-2018, 04:48 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-10-2018, 10:06 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-11-2018, 09:49 AM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-11-2018, 09:54 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-11-2018, 11:34 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-11-2018, 11:39 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-11-2018, 11:14 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-12-2018, 12:12 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-02-2019, 08:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-02-2019, 10:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-02-2019, 11:02 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 09:17 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 09:27 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 10:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-03-2019, 10:04 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-03-2019, 10:06 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 10:10 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 01-03-2019, 11:15 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-03-2019, 11:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-03-2019, 11:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 12:23 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 12:44 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 01:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 01:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 01:20 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 04:11 PM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 01-04-2019, 04:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 05:38 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 06:03 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 08:53 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 09:58 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 12:02 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 12:17 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 01:20 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 02:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 03:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 04:31 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 04:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 06:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-05-2019, 08:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 09:02 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 09:42 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-05-2019, 10:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-07-2019, 12:26 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-07-2019, 07:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-08-2019, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-11-2019, 11:12 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-11-2019, 11:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-12-2019, 01:08 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-12-2019, 12:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-12-2019, 01:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-12-2019, 09:58 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-27-2019, 01:35 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 12:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-28-2019, 06:44 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 07:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 07:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-28-2019, 07:33 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 09:26 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 09:34 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 10:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 10:17 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 01:31 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-29-2019, 10:57 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 12:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-29-2019, 06:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 08:12 PM

Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 08:33 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-05-2019, 09:38 AM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 05-05-2019, 07:09 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-05-2019, 11:05 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-05-2019, 11:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:27 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 05-06-2019, 09:48 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:57 AM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 05-06-2019, 10:25 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:31 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 10:36 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 12:14 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 01:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-06-2019, 02:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 02:48 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 03:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 05:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 07:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 08:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:31 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 08:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 09:01 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:55 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 11:15 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-07-2019, 08:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-07-2019, 09:26 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-07-2019, 10:09 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-07-2019, 05:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-07-2019, 07:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-07-2019, 11:36 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-08-2019, 11:03 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-08-2019, 06:49 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-08-2019, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-08-2019, 08:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-09-2019, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-09-2019, 10:47 AM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 06-18-2019, 01:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Nuclearcricket - 06-18-2019, 04:05 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 06-18-2019, 05:14 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 06-18-2019, 06:01 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-10-2020, 11:34 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-10-2020, 06:52 PM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-21-2021, 03:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 04-21-2021, 05:16 PM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-21-2021, 10:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 04-21-2021, 10:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 04-24-2021, 08:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-25-2021, 11:17 AM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-25-2021, 11:45 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-25-2021, 12:35 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 04-26-2021, 10:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-26-2021, 11:53 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 04-27-2021, 12:55 AM

RE: Designing the 2-diameter paper patch bullet. - by Steveu - 01-16-2024, 12:10 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-19-2024, 08:47 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-13-2024, 02:00 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-14-2024, 10:19 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-14-2024, 02:08 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 03-14-2024, 08:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-14-2024, 09:21 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-17-2024, 02:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-18-2024, 03:22 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-20-2024, 03:28 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-20-2024, 03:32 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-21-2024, 08:13 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-21-2024, 10:12 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-22-2024, 09:28 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-22-2024, 11:03 AM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-22-2024, 02:54 PM

View a Printable Version

Users browsing this thread: 6 Guest(s)

Login
Username:
Password:	Lost Password?
	Remember me