Designing the 2-diameter paper patch bullet.

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Thread Modes

Designing the 2-diameter paper patch bullet.

01-05-2019, 12:17 AM,

#104

Kurt

Offline

Grand advisory committee

Posts: 4,246
Location:
Joined: May 2012
Reputation: 2

RE: Designing the 2-diameter paper patch bullet.

The bullet on the left is Brents prolate and the bullet on the right is what I had Paul make first and it was not stable at 900 so I had him make a larger hemisphere to shorten the length of the ogive and it shot very good to the 1000 and those bullets in the above shoot well to the 1000 and this bullet shoots very well in the 16 twist .45-90.

The reason a dog has so many friends is because he wags his tail instead of his tongue.

Find

Reply

« Next Oldest | Next Newest »

Messages In This Thread

Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-05-2018, 09:44 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-05-2018, 10:24 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 08-06-2018, 08:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-06-2018, 10:27 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 08-06-2018, 10:09 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-06-2018, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-07-2018, 09:13 PM

RE: Designing the 2-diameter paper patch bullet. - by AzTBH - 08-18-2018, 05:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-18-2018, 08:38 PM

RE: Designing the 2-diameter paper patch bullet. - by AzTBH - 08-20-2018, 08:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-23-2018, 08:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 05:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 06:26 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 08:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 08:35 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-29-2018, 09:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-29-2018, 09:40 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 11:37 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 01:47 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 02:27 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 08-30-2018, 03:28 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 08-30-2018, 04:51 PM

RE: Designing the 2-diameter paper patch bullet. - by Martini2 - 08-30-2018, 07:44 PM

RE: Designing the 2-diameter paper patch bullet. - by Eric Johanen - 09-02-2018, 10:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-04-2018, 09:34 AM

RE: Designing the 2-diameter paper patch bullet. - by Eric Johanen - 09-04-2018, 10:07 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-04-2018, 10:47 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 09-06-2018, 12:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 01:10 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 09-06-2018, 05:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 09-06-2018, 01:20 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 03:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 09-06-2018, 06:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 09-06-2018, 10:47 PM

RE: Designing the 2-diameter paper patch bullet. - by flatsguide - 09-18-2018, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-05-2018, 07:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-05-2018, 07:24 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-05-2018, 10:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-05-2018, 10:05 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 06:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-06-2018, 07:24 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 07:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 07:57 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 11-06-2018, 08:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 08:24 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-06-2018, 09:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-06-2018, 11:40 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 12:39 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-07-2018, 01:01 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:54 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 09:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 06:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 06:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:08 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 08:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 08:25 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-07-2018, 08:54 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-07-2018, 10:28 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-09-2018, 10:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 01:49 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 07:18 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 07:57 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 07:22 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-09-2018, 09:49 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-09-2018, 10:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-09-2018, 11:47 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 11-10-2018, 12:12 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 11-10-2018, 12:14 AM

RE: Designing the 2-diameter paper patch bullet. - by MikeT - 11-10-2018, 12:29 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-10-2018, 04:48 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-10-2018, 10:06 PM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-11-2018, 09:49 AM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 11-11-2018, 09:54 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-11-2018, 11:34 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-11-2018, 11:39 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 11-11-2018, 11:14 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 11-12-2018, 12:12 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-02-2019, 08:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-02-2019, 10:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-02-2019, 11:02 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 09:17 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 09:27 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 10:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-03-2019, 10:04 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-03-2019, 10:06 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-03-2019, 10:10 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 01-03-2019, 11:15 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-03-2019, 11:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-03-2019, 11:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 12:23 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 12:44 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 01:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 01:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 01:20 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 04:11 PM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 01-04-2019, 04:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 05:38 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 06:03 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-04-2019, 08:53 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-04-2019, 09:58 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 12:02 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 12:17 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 01:20 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 02:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 03:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 04:31 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 04:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 06:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-05-2019, 08:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-05-2019, 09:02 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-05-2019, 09:42 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 01-05-2019, 10:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-07-2019, 12:26 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-07-2019, 07:32 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-08-2019, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-11-2019, 11:12 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-11-2019, 11:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-12-2019, 01:08 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-12-2019, 12:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 01-12-2019, 01:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-12-2019, 09:58 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-27-2019, 01:35 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 12:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-28-2019, 06:44 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 07:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 07:21 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-28-2019, 07:33 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 09:26 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-28-2019, 09:34 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 10:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-28-2019, 10:17 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 01:31 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 01-29-2019, 10:57 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 12:16 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-29-2019, 06:00 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 08:12 PM

Designing the 2-diameter paper patch bullet. - by Semtav - 01-29-2019, 08:33 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-05-2019, 09:38 AM

RE: Designing the 2-diameter paper patch bullet. - by mherth - 05-05-2019, 07:09 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-05-2019, 11:05 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-05-2019, 11:29 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:27 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:33 AM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 05-06-2019, 09:48 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:57 AM

RE: Designing the 2-diameter paper patch bullet. - by Gunlaker - 05-06-2019, 10:25 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:31 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 10:36 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:46 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 10:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 12:14 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 01:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-06-2019, 02:07 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 02:48 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 03:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 05:30 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 07:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-06-2019, 08:22 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 08:31 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 08:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 09:01 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-06-2019, 09:55 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-06-2019, 11:15 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-07-2019, 08:52 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-07-2019, 09:26 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-07-2019, 10:09 AM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-07-2019, 05:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 05-07-2019, 07:41 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 05-07-2019, 11:36 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-08-2019, 11:03 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-08-2019, 06:49 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-08-2019, 08:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-08-2019, 08:50 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 05-09-2019, 10:29 AM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 05-09-2019, 10:47 AM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 06-18-2019, 01:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Nuclearcricket - 06-18-2019, 04:05 PM

RE: Designing the 2-diameter paper patch bullet. - by Caprock - 06-18-2019, 05:14 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 06-18-2019, 06:01 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-10-2020, 11:34 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-10-2020, 06:52 PM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-21-2021, 03:19 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 04-21-2021, 05:16 PM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-21-2021, 10:37 PM

RE: Designing the 2-diameter paper patch bullet. - by Don McDowell - 04-21-2021, 10:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 04-24-2021, 08:59 PM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-25-2021, 11:17 AM

RE: Designing the 2-diameter paper patch bullet. - by Kenny Wasserburger - 04-25-2021, 11:45 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-25-2021, 12:35 PM

RE: Designing the 2-diameter paper patch bullet. - by Distant Thunder - 04-26-2021, 10:49 AM

RE: Designing the 2-diameter paper patch bullet. - by Semtav - 04-26-2021, 11:53 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 04-27-2021, 12:55 AM

RE: Designing the 2-diameter paper patch bullet. - by Steveu - 01-16-2024, 12:10 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 01-19-2024, 08:47 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-13-2024, 02:00 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-14-2024, 10:19 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-14-2024, 02:08 PM

RE: Designing the 2-diameter paper patch bullet. - by J.B. - 03-14-2024, 08:46 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-14-2024, 09:21 PM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-17-2024, 02:39 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-18-2024, 03:22 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-20-2024, 03:28 PM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-20-2024, 03:32 PM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-21-2024, 08:13 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-21-2024, 10:12 AM

RE: Designing the 2-diameter paper patch bullet. - by beltfed - 03-22-2024, 09:28 AM

RE: Designing the 2-diameter paper patch bullet. - by Kurt - 03-22-2024, 11:03 AM

RE: Designing the 2-diameter paper patch bullet. - by bpcrshooter - 03-22-2024, 02:54 PM

View a Printable Version

Users browsing this thread: 5 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication