Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
40-70 and the dd patched
01-20-2019, 06:55 PM,
#1
40-70 and the dd patched
Finally got a chance to run the Hepburn with the dual diameter bullet I had Brooks build. Think the thing is going to work alright. This rifle does not like Swiss 1 1/2 at all...
Shot this target at 600 69 grain of OE 1 1/2 , Jamison brass, rp primers. Wiped between shots with the bore wipers from BACO wet with 7-1 water/napa oil followed by a 2 inch flannel patch.

   
A wise man can always be found alone. A weak man can always be found in a crowd.
Reply


Messages In This Thread
40-70 and the dd patched - by Don McDowell - 01-20-2019, 06:55 PM
RE: 40-70 and the dd patched - by Gunlaker - 01-21-2019, 11:13 AM
RE: 40-70 and the dd patched - by Don McDowell - 01-21-2019, 11:53 AM
RE: 40-70 and the dd patched - by beltfed - 01-22-2019, 12:33 AM
RE: 40-70 and the dd patched - by Don McDowell - 01-22-2019, 01:16 AM
RE: 40-70 and the dd patched - by Kurt - 01-22-2019, 01:05 PM
RE: 40-70 and the dd patched - by Kurt - 01-22-2019, 01:40 PM
RE: 40-70 and the dd patched - by Don McDowell - 01-22-2019, 02:08 PM
RE: 40-70 and the dd patched - by Kurt - 01-22-2019, 02:31 PM
RE: 40-70 and the dd patched - by Don McDowell - 01-22-2019, 02:50 PM
RE: 40-70 and the dd patched - by Don McDowell - 01-26-2019, 11:33 PM
RE: 40-70 and the dd patched - by Distant Thunder - 01-27-2019, 04:06 PM
RE: 40-70 and the dd patched - by Don McDowell - 01-27-2019, 06:13 PM
RE: 40-70 and the dd patched - by Distant Thunder - 01-27-2019, 09:55 PM
RE: 40-70 and the dd patched - by Don McDowell - 01-27-2019, 10:18 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication