Remington rolling block singel set trigger

[Randy Bohannon]

How most of the single set triggers that have worked for me and was taught. Push the trigger forward then there is a little click by pulling the trigger very lightly it should not fire/release anything at this point, you will feel the 'click' there is a considerable amount of 'take up' before the trigger will release and fire.When ready to take the shot apply pressure to the trigger using the pad of your finger,this is where you will appreciate a single set trigger that is functioning as it should.After 'setting' the trigger it is normal for the hammer to not fall on some set triggers after the fist click pulling the trigger let the triggger reset forward and then try and pull the trigger it should fall with very little pressure, like 1/1.5 lb light, some need to reset, take up the slack very light sear release and it should go bang.