Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Forming Cases and other things
11-18-2019, 09:16 PM,
#28
RE: Forming Cases and other things
I weighed the various ".44-77" brass with these results;

BACO .50-110 - 229.9 grains

.300 Win Mag - 224.7 grains

Bertram 45 base - 185.7 grains

Starline .45-2.6 203.4 grains

JBA .44-77 - 226.9 grains

I also measured the inside diameter of the necks on these fire formed cases.

BACO .50-110 - .444"

.300 Mag - .438 to .440" (somewhat depends on the brand of brass used)

JBA .44-77 - .448 to .449"

Bertram 45 Base - .444 to .446"

All except the JBA were fire formed with bore diameter paper patch bullets so the thicker necks were not a problem. Clearly some of the conversions would have to be neck reamed to be used with groove diameter bullets (.447-.448).
Jim Kluskens
aka Distant Thunder
Reply


Messages In This Thread
RE: Forming Cases and other things - by Kurt - 11-06-2019, 05:26 PM
RE: Forming Cases and other things - by Kurt - 11-06-2019, 05:38 PM
RE: Forming Cases and other things - by Kurt - 11-06-2019, 08:10 PM
RE: Forming Cases and other things - by Kurt - 11-07-2019, 10:33 AM
RE: Forming Cases and other things - by bobw - 11-14-2019, 03:05 PM
RE: Forming Cases and other things - by Kurt - 11-14-2019, 06:26 PM
RE: Forming Cases and other things - by Kurt - 11-14-2019, 09:38 PM
RE: Forming Cases and other things - by Kurt - 11-16-2019, 10:22 AM
RE: Forming Cases and other things - by Kurt - 11-17-2019, 04:59 PM
RE: Forming Cases and other things - by Kurt - 11-17-2019, 06:37 PM
RE: Forming Cases and other things - by J.B. - 11-18-2019, 05:50 AM
RE: Forming Cases and other things - by J.B. - 11-18-2019, 04:48 PM
RE: Forming Cases and other things - by Distant Thunder - 11-18-2019, 09:16 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication