Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Loading the .50-90 at the range
02-21-2020, 01:29 PM,
#7
RE: Loading the .50-90 at the range
I welded up a platform that mounted to the trailer hitch intercepter using 1" square tubing welded to a 1-1/2 square that would slide into the intercepter and a plate to the 3/4" square tube that slid into the 1" coming up from the piece in the intercepter and a 1/4X8" plate the press was mounted on and I used this at the Quigley or other matches when I needed to reload and working up loads.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
Reply


Messages In This Thread
Loading the .50-90 at the range - by pacecars - 02-21-2020, 12:38 AM
RE: Loading the .50-90 at the range - by R-71 - 02-21-2020, 02:24 AM
RE: Loading the .50-90 at the range - by pacecars - 02-21-2020, 07:30 AM
RE: Loading the .50-90 at the range - by Kurt - 02-21-2020, 10:43 AM
RE: Loading the .50-90 at the range - by bobw - 02-21-2020, 11:41 AM
RE: Loading the .50-90 at the range - by Kurt - 02-21-2020, 01:29 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication