Posts: 426
Location: Down Under
Joined: Apr 2013
Reputation:
0
RE: .44-77 PP bullets.
Caprock... the overall length has come out at 1.405" with the base length @ .2". The transition or 'ramp' if you will looks to be about .04" to the shank or bore riding section which runs for about .445". Thence the ogive etc. This is just done with some average grade verniers but should give you an idea. This was cast in 16/1.
J.B.
" Don't know where I'm going but there's no sense being late " !