The DDPP bullet

[Kurt]

Gavin.

I shot around 18-20 I think with different amounts of powder and they all looked like what you see in the photo. You could have rewrapped them and used them again. The snow this year was not the best if you would use a softer alloy like 1/20 because the snow was wet and heavy and very little this last winter.
1/10 T/L you will get some obturation but not ad deep as 1/16 and if you use a smidge of antimony with the 1/10 mix you better patch it tight or better yet patch to groove diameter.
I have shot many PP patched to groove diameter using straight WW and they shot very well but they took up a lot of powder room in the .40-70.
If I wanted to shoot a reduced load in my .45-2.6 it would be with a groove diameter PP bullet. They are actually easier to work up a good load using a groove diameter patched bullet.

HEY J.B why don't you take back some of this hot oven heat we're getting. I cant even shoot in the shade with out getting the T shirt wet enough to wring out the sweat.