DDEPPs in 38-50RH

[beltfed]

I am still working on loads for my Brg BPCR 38-50Rem Hep/10 twist Douglas 30" Octagon.
So far all shot at 200yds with scope.
I am Shooting mainly the JIM371360E bullet, 1.463" long. I have worked up to a load of F150primer/66 gr Swiss 3F/0.060LDPE wad
compressed about 0.075" for
Bullets seated for a slight crush fit into the leade by the taper between
the base band and the body.
YesterdaysFirst 5 shot group with the 371360/66 gr S3. 1.5minVertx 1 min Hor'z.
[img]IMG1885[/img]
Then second group was shot with the 371345E at 1.403" long, designed for 12 twist barrel.
[img]IMG1886[/img]
All 5 into 1.4", Four of them into 1". I would like to think that second shot at 1:00 was ME. This is second time this bullet has shot better than the longer 360 gr. Hmmmm!
This 66 gr load with the 360 gr bullet was shot with Iron sights at the
ISSA Schuetzen Postal match and won the BPCR category.
beltfed/arnie