Just another mould..or two.

[Kurt]

Well Jim if your needing more of those Sage I can send the mould and you can cast your supply or I can send a few so you can have some to send to BA or Steve and have a mould duplicated.
I have no problem in a accuracy change seating the bullets deeper with a slight change of a powder load or compression. It just takes a little change with the load to get the same results.
I know what your saying about moving things around. I moved my mole den upstairs and some things are placed at a different location on the basement floor to get the room empty for the Mill and Lathe. I put the mill down there but when I got the Lathe the 600 pounds was just to much for me to slide down a couple planks on the stairway getting it done plus the 1" thick plate steel tables 36" X 43" with 1/4" X 3" square tube megs they have I have trouble moving them on a concrete floor so they stay up in the garage and the mill will end up there also when my Son and Son-in-law show up next time to do the carving up from the basement LOL. Garage is now heated so it will be good messing with projects there.
Good move keeping some of your tooling. It now turns into fun instead of making a living with them.