Pistol primers and breech block damage?

[Kurt]

Don,
If I was to have RMC make some brass I would request the small rifle primer pocket. Back some years ago Lapua or Norma, cant remember for sure made .308 brass with small rifle primers.
I soldered the slash hole shut once with silfloss and drilled two small holes like the berdan and I didn't see enough improvement to worth the time converting 200 cases. Maybe if one would enlarging the primer pockets and make an anvil when milling the silver solder out might be a different story.


man were getting hit with some white out snow. Had to go to town and if there wasn't a dark spot or trees in the fence rows you cant see 300 yards or less. Had to hold center between fences.