Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Gavin Dinghams 44 mould
04-16-2013, 08:13 PM,
#8
RE: Gavin Dinghams 44 mould
(04-16-2013, 12:22 PM)Don McDowell Wrote: Gary no that's the picture Gavin took and posted on his Photobucket so we could see it.I think if you look there's already a 45 of real similar design there.
Here's his disrciption of it as cast in the picture.
Overall length is 1.097" ..or close enough to 1.1"
..as cast is .447 diameter ..base , second and third driving band.

..the top band with the taper to the nose..is also .447" but only for about .015"..then it tapers off quickly to the nose which is running at .433 for approximately 1/4" inch before the ogive and finishing at a meplat of .2".

Man Don @ .433 it will have a lot of slop ahead of the case mouth and when it gets pushed in the hinder when the charge gets lit up there might be a lot of weird things going on as it flies down range???
But it will make a good bullet for shooting dirty.
The reason a dog has so many friends is because he wags his tail instead of his tongue.
Reply


Messages In This Thread
Gavin Dinghams 44 mould - by Don McDowell - 04-16-2013, 08:40 AM
RE: Gavin Dinghams 44 mould - by Caprock - 04-16-2013, 09:31 AM
RE: Gavin Dinghams 44 mould - by Lumpy Grits - 04-16-2013, 11:11 AM
RE: Gavin Dinghams 44 mould - by Don McDowell - 04-16-2013, 12:22 PM
RE: Gavin Dinghams 44 mould - by Kurt - 04-16-2013, 08:13 PM
RE: Gavin Dinghams 44 mould - by Don McDowell - 04-16-2013, 08:53 PM
RE: Gavin Dinghams 44 mould - by Lumpy Grits - 04-16-2013, 05:17 PM
RE: Gavin Dinghams 44 mould - by Don McDowell - 04-16-2013, 05:22 PM
RE: Gavin Dinghams 44 mould - by powderburner - 04-16-2013, 06:42 PM
RE: Gavin Dinghams 44 mould - by Don McDowell - 04-16-2013, 08:51 PM
RE: Gavin Dinghams 44 mould - by Iron Coyote - 02-20-2014, 07:31 PM
RE: Gavin Dinghams 44 mould - by Don McDowell - 02-20-2014, 07:59 PM
RE: Gavin Dinghams 44 mould - by Mike - 02-21-2014, 03:15 PM
RE: Gavin Dinghams 44 mould - by Iron Coyote - 02-21-2014, 05:55 PM
RE: Gavin Dinghams 44 mould - by Mike - 02-21-2014, 06:19 PM
RE: Gavin Dinghams 44 mould - by Iron Coyote - 02-22-2014, 09:59 AM
RE: Gavin Dinghams 44 mould - by Mike - 02-23-2014, 09:47 AM
RE: Gavin Dinghams 44 mould - by Caprock - 11-13-2014, 06:22 PM
RE: Gavin Dinghams 44 mould - by Nuclearcricket - 11-13-2014, 08:41 PM
RE: Gavin Dinghams 44 mould - by Kurt - 11-13-2014, 09:06 PM
RE: Gavin Dinghams 44 mould - by Nuclearcricket - 11-13-2014, 09:44 PM
RE: Gavin Dinghams 44 mould - by J.B. - 11-13-2014, 09:48 PM
RE: Gavin Dinghams 44 mould - by Nuclearcricket - 11-14-2014, 09:27 AM
RE: Gavin Dinghams 44 mould - by J.B. - 11-14-2014, 05:35 PM
RE: Gavin Dinghams 44 mould - by Caprock - 11-14-2014, 08:18 PM
RE: Gavin Dinghams 44 mould - by Nuclearcricket - 11-14-2014, 10:16 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)

Contact Us | HistoricShooting.com | Return to Top | | Lite (Archive) Mode | RSS Syndication