Paper Patch Cutting toolset-with photos

[Frank Savage]

OK guys, I just hope the folowing won´t be taken as an unlawful advertisement and/or breaking the rules here. But probably have no other chance how to say the folowing, so if found unacceptable here, please move this and/or let me know to find other place to play.

Getting pokes here as well as by other means from this forum, I will pick the glove and will go for it, at least from the wood I have on hand-will check for how many sets is it worth, as I got some of it stolen (finished parts of my wagoon box, ready to assembly included...).
Checking posibilities of shipping since I´m from europistan, as well as getting more wood. The wood will take some time, about three weeks. Almost for sure, the next one will be of some other kind, but will try hard to be it some of the dark coloured kind. If someone would be interested in light coloured one, let me know.
Also, since the wood are pieces from sliced veneer mfg, the back side has some flaws from retaining pins. They are not of even thickness, as well as level in crossection. The cutting lane is OK, no bumps there, but realy it´s not a square plank. About 1/32-1/25" of thickness variation from back to front is not uncomon. Planing it even is a no-go option, tried it half day on +/- $110 000 variable speed planer with several knive sets some years ago-no way when dry, maybe when soaking wet from two weeks in steam furnace. Horrible grain tearing and cracking from vibrations, as it has some waves and stripes in grain all over and through. I´m happy I can plane it by extra sharpened hand plane on the edges.
I´m on hand tolls only, so the slots are cut with jewelers saw and I´m no master of it, so regardless some file and sanding work, you can stick as much as three or four papers between the slot wall and the leading/retaining bolt boss in some positions and transitions from the paralel part to round ends are way not uniform. Will post a photo for those interested if they find it acceptable, albeit I will try to make it all even and not abusive for eye. If it happens that more folks will be interested, I´ll have to tool up at least to some degree, but even after that there´ll be a lot of pure hand fiddling, so every each piece will show different course and process of work and worksmanship-it´s a must due to wood properties, which are quite strange even in comparison with curled mahagony. Hope to retain the worksmanship level constant or rising
Along the wood (which is quite crucial, as from my point of view it would loose quite a lot of charm if made from plywood), I´ll need some time to sort it all out. As an self-employed, I have only quite late evenings to start with, so please bear with me. But surely will try as not to make it over 150 buck deal, because with shipping included it would loose most of the appeal seems to me. If you consider it too low and will do so even after flaw report, please let me know A group buy would help shipping costs alot. Also, will do hard to make them delivered by begining of the match season, at least those first ones.