32-20 brass

[mherth]

Looking for 32-20 brass, Winchester brand. Need 50 or so.

[powderburner]

just curious , can that be made out of 38 spl or 357 brass? just run it through a sizer?

[Don McDowell]

Mike would some Peters do ya? I've got some Winchester but it's primed, so sending it to you is gonna be a problem. Lest you can wait till Alliance.

[Nuclearcricket]

just curious , can that be made out of 38 spl or 357 brass? just run it through a sizer?

No, the .38 cases are too large in diameter. The .32-20 case is .350 at the rim and the .38 cases are close to .375. Just too much to squeeze down.
Sam

[powderburner]

just curious , can that be made out of 38 spl or 357 brass? just run it through a sizer?

No, the .38 cases are too large in diameter. The .32-20 case is .350 at the rim and the .38 cases are close to .375. Just too much to squeeze down.
Sam

thanks , I only looked at a case a time or two and always wondered , never had dies to try,so just kept thinking and not doing,

[Don McDowell]

Dean you show up with that small of a weenie gun, and folks are really gonna talk/giggle.
Neat little cartridge, if you ever get a chance to get one of those rifles grab it. It's a bit noisy in a handgun, but fun to shoot anyway.

[Mike]

Looking for 32-20 brass, Winchester brand. Need 50 or so.

Are you still looking? I've got some loose stuff, empty and loaded. Let me know if you are still in need. Shoot sharp, Mike

[mherth]

Looking for 32-20 brass, Winchester brand. Need 50 or so.

Are you still looking? I've got some loose stuff, empty and loaded. Let me know if you are still in need. Shoot sharp, Mike

Thanks Mike! Don came through with some that will get me through until new brass becomes available again.
Mike

[Mike]

Looking for 32-20 brass, Winchester brand. Need 50 or so.

Are you still looking? I've got some loose stuff, empty and loaded. Let me know if you are still in need. Shoot sharp, Mike

Thanks Mike! Don came through with some that will get me through until new brass becomes available again.
Mike

Good doin's!!

[John Boy]

...if you ever get a chance to get one of those rifles grab it.

I added a brand new Model 92 in 32-20 to go along with my #2 Rolling Block. It started it's life as a Rossi M92 in 38Spl. Now relined to 32-20 and minor mod's to the internals