Thinking on a new rifle

[Hiwall55]

This is my 45/110. Pedersoli 34 inch barrel, soule sight, MVA scope bases for a 28 inch scope, pistol grip, shotgun butt,die set with compression die and trim die and 135 pcs. Of brass . I shoot P-P in this one . $1300 plus shipping

[Gussy]

Thank you guys for the help. Kurt I live in WA. state on the dry side.

What part of the dry side. I'm in the SE corner. Mostly shoot in the back yard.
Gus

[Don McDowell]

When it comes to the 44's you can't go with the straight cases that are simply made by running the 45 xx case in a sizing die and going on about your business. I like that 44-90 st case a lot..
Also today I watched 2 guys running 40-70' shoot right thru some really nasty conditions and nearly clean the ram line...
When it comes to the 1k line your 45-70 will do that just fine. So maybe choosing one of the other diameters might just add a bit of spice to the usual bowlfull of gruel.

[Mike]

I really must agree with Don. If you already have a .45 and a .50, it's time to get a .40 and the .40/70 SS is a sweet one. Shoot sharp, Mike

[mustanggt]

Gussy, Benton Co.

[mustanggt]

Well Don that was really all this was about, spice up my shooting life.

[Semtav]

well then if you are really thinking of a 40 cal, I'd suggest the 40-82 with a 13 or 14 twist barrel.

[bruce moulds]

what semtav says + 1.
40/72 is a ballistic twin. very similar case capacity.
13 twist will allow a bullet 1.550" long.
shot 900 & 1000 with one last sat.
keep safe,
bruce.