+- Historic Shooting Forums (http://historicshooting.com)
+-- Forum: General (http://historicshooting.com/forum-1.html)
+--- Forum: The rifles (http://historicshooting.com/forum-2.html)
+---- Forum: Rimfire (http://historicshooting.com/forum-13.html)
+---- Thread: Japchester Stock (/thread-3179.html)
Pages:
1
2
Japchester Stock - Steveu - 09-02-2021
All,
Looking to get rid of the current buttstock on the Japchester Low Wall. I tried CPA and Treebone , but no avail. The rifle sports a Badger Barrel and shoots great. The Japchester High Wall wood will not work because it is a straight cut receiver and the low wall receiver is dished.
Any suggestions?
Cheers,
Steve
RE: Japchester Stock - Don McDowell - 09-02-2021
Might try Pecatona stocks
RE: Japchester Stock - Steveu - 09-02-2021
Pecatona only has high wall stocks.
RE: Japchester Stock - beltfed - 02-06-2022
YOu might contact Dave Crossno gun stocks and discuss the problem.
I believe they have a pattern for the Japchester/ browning BPCR Hi walls, but they might be able to use your current
low wall stock front end as a pattern to modify off of their Hi wall pattern.
dibbleguns.com
I have a similar situation with a Brg Low wall traditional Hunter action with a 38-72 Krieger barrel on it.
My friend who had bought it from me lost the low wall stock somehow.
I, too want a BPCR Hi Wall pattern pistol grip stock on it. I have actually bolted a Brg Bpcr stock on to the action.
It fits, but the cutout for the tang is longer than the low wall tang, so as soon as I make a deal to buy the barrelled action
back from him, I may pick up a Crossno stock for it, telling them to do the rough inletting on the top tang short of their pattern.
Arnie
RE: Japchester Stock - Kurt - 02-06-2022
You might ask Dan Zimmerman at DZ Arms if he can make you a stock. He has the equipment for duplicating a stock.
When I picked up my Hep he was working with a MVA receiver on one.
RE: Japchester Stock - Steveu - 02-06-2022
Thanks fella’s for the info. I will give both a call this week.
RE: Japchester Stock - beltfed - 02-06-2022
Here is the Crossno website
https://www.angelfire.com/ok5/crossnostocks/miscpattern.html
Arnie
RE: Japchester Stock - Gussy - 02-06-2022
This is my Browning low wall. It sounds like what you're looking for. Have you checked for a Browning?
RE: Japchester Stock - beltfed - 02-06-2022
Gussy,
Yes, that is exactly the stock I would like to have on this 38-72 Low Wall Brg.
should I be able to buy the barrelled action back from my friend.
Shotgun butt, PG. Don't need a right hand cheekpiece on mine, though. I shoot left handed. The Brg BPCR pattern at Crossno's has right hander cheekpiece.
Arnie
RE: Japchester Stock - Kurt - 02-06-2022
Arnie,
Will a low wall handle the heavy load of the .38-72?