Development of PP loads for the .44-77.

[Kurt]

Be sure to report when you get a chance to see how it flies.
I have a little more leeway with my funnel shaped throat then the standard chamber. Erik gave me one of his bullets and I patched it with .0015 paper and it's to tight to fit a fired case shot with my rifle. It tears the patch seating it in the case so the .441 should be a good fit.
I took the .22 barrel off my .CPA and screwed on the 1/16 twist .44-100 st. so I can test that bullet shot with a .44-2.6 with a 17 and 16 twist as well as the .44-77's with a 19 and 17 twist and a couple .44-90 bn's with a 17 and 19 twist.
Better get some powder ordered. 5000 210 fed primers are coming tomorrow