I give up!!

[Kurt]

Jim I been working with this bullet for just about two years with the .44. The 1/19 ROT in this particular rifle I get a lot of yaw looking at the holes in the paper. At 200 yards the holes are a 9/16 oval and I pushed them just short of 1400 fps to try to get them stabilised.
Last winter I recovered several from the snow to see what was going on and they all looked great, no fins or gas cuts. Nose had no setback for the lands to make cuts in the ogive past the reduced front band.
To bad the .44-100 wont except a GG bullet to see what the 1/17 ROT does.
For the .44-90 I have one and it works very good in that rifle.