New portable loading table

[JReed]

Wanted to share something I had a friend help me out with.
   
   
   

It is made with 2" angle the legs are bolted on, the top is 1x6's with a 1/2' ply cover. It measures 18x18 for the top and stands 34". I currently have both my Lee O ring press and the Ole Rock Chucker mounted to it with room in the top for a beam scale and components. the whole thing breaks down in around 10 minutes and ready to head to the range for load develpoment.

[Don McDowell]

Looks like it should sure be stable enough to load with.

[bruce moulds]

interesting to see how different people deal with droptubes.
I do my loading seated, and the cartridge case is at ground level so I can pour while in the chair.
for a portable outfit, you probably have to stand, so high droptube is better.
keep safe,
bruce.

[JReed]

Don I thougt I would need to add a sand bag down low to help with the CG but this thing with the presses and everthing else mounted it is solid as a rock. I loaded 100 303 British on it this week and 40 of 45-70 using the Rock Chucker and a compression die it never wiggled once.

Bruce I do all my work with the presses seated and stand when it is time to poor charges. Works out for me as I find that my back will only tolerate sitting or standing for so long so it keeps me moving.

So far I think its a real good size for reloading in limited spaces and I can move it by my self when I need to rearange the garage.